Gobivo.com
3-36V 6-24V DC Car Truck Voltage Circuit Tester Digital Display Electric Pen Probe Pen Light Bulb Automobile Diagnostic Tools
Taxes calculated at checkout.
In stock, ready to order
- Secure Shopify checkout
- Order updates by email
- Friendly customer care
Product details
SPECIFICATIONS
Accuracy Class: 6-24V DC Car Truck Voltage Circuit Tester Digital Display Electric Pen
Battery Included: no
Brand Name: Aideepen
Certification: CE
DIY Supplies: Electrical
Dimensions: 6-24V DC Car Truck Voltage Circuit Tester Digital Display Electric Pen
Display Type: Digital Only
High-concerned chemical: none
Model Number: 6-24V DC Car Truck Voltage Circuit Tester Digital Display Electric Pen
Operating Temperature: 6-24V DC Car Truck Voltage Circuit Tester Digital Display Electric Pen
Origin: Mainland China
Power Supply: DC
Semi-finishedproduct: No
Voltage range: Other









6-24V 3-36V DC Car Truck Voltage Circuit Tester Digital Display Electric Pen Long Probe Pen Light Bulb Automobile Diagnostic Tools Auto Repair
3-36V type
Feature:
1. Sharp steel probes can easily pierce wire insulation to check circuits.
2. The probe pen is ideal for checking circuits, fuses, switches and wiring in cars, trailers, boats, motorcycles and other low voltage systems.
3. Ground the alligator clip and test the circuit with a probe, if the light is on, there is electricity.
Specification:
Material: ABS+metal
Clamping capacity: 20A
Voltage test range: 6V-24V
Bulb: 3 watt bulb (replaceable)
Pen Length: 17.3 cm/6.8 inches
Probe Length: 8.3 cm/3.3 inches
Cord length: 96 cm / 37.8 inches
Instructions:
1. Clip the measured alligator clip to the ground wire (such as the metal or negative pole of the car)
2. Measure the conductive metal in the test circuit with the needle of the electric pen
3. If the light bulb of the stylus will light up, it means that the measured point has formed a circuit and works normally. On the contrary, there is a fault at the measured point, which is to be checked.
Notice:
1. Since the world voltage is different, please allow a tolerance of ±1.5V.
2. Due to the chip update, the working range is 6V to 24V, but the mark on the test pen body shows 6 to 12V, please do not order if you mind.












6-24V Green
Feature:
1. Designed to detect faults in low voltage circuits of traffic or transport machinery.
2. Suitable for maintenance of automobiles, motorcycles, bulldozers, road rollers, excavators, etc.
3. Simple and practical tool to diagnose and troubleshoot electrical problems faster and easier than DMM (Digital Multimeter).
4. You can use it to check any positive circuit. If the fuse is good, you can use a circuit tester to trace the wiring path and find the problem. If the positive path is good, you can also check the ground point of the circuit with a test light.
Specification:
Material: ABS+Steel, LED
Size: (Approx.) Pen Length: 150mm, Line Length: 75cm
Packing list:
2x car voltage test pen
1x Coil Cable










6V-24V Green with light
Specifications:
Test range: DC 6V-12V-24V
Tester Length: (approx.) 15.2cm / 6"
Cable Length (Unstretched) : 73.5cm / 29"
Total cable length (stretch) : 240cm / 94.5"
Note:
Due to differences between different monitors, the picture may not reflect the actual color of the item. Thanks!
Package includes:
1* tester
1* test light
1* coil cable (with alligator clip)





6V-24V Black no digital display
Features:
1. Light weight, easy to carry.
2. Test the circuit from 6V to 24V.
3. The sharp steel probe can easily pierce the wire insulation to check the circuit.
4. When the circuit connection is completed, the lamp in the handle will light up.
5. The handle is made of AS plastic and the probe of quenched and tempered carbon steel is chrome plated.
Specifications:
Voltage range: 6V-24V
Clamp capacity: 20APM
Pen length: 17.3cm/6.8 inch
Probe length: 8.3cm/3.3 inch
Wire length: 96cm/37.8 inch
Bulb: 3 watt bulb (replaceable)
Material: AS plastic, carbon steel
Handle color: as shown in the figure
Package includes:
1 x Wire Circuit Tester









6V-24V Red no digital display
Application:
6-24V automobile screwdriver test lamp, a widely used circuit test, is suitable for various circuits on automobiles. The automobile tester can also be used for other 6-24V circuit tests, including battery test, headlamp test, brake lamp test, fault connection and fuel injector signal test.
Specifications:
Color: red+green
Material: metal+ABS
LED: red and green
Package content:
1* automobile circuit tester
Test lamp bulb: This LED test lamp circuit test lamp bulb has high visibility and long service life. It can indicate the status of the
circuit. The brightness of the top 3W lamp can vary with the measured voltage and can be replaced.
Two way test: The alligator clip of the circuit breaker tester can be connected to the negative or positive grounding, and the probe contacts the other side. During a positive connection, the red LED will light up, and during a negative connection, the green LED will light up.
Note:
Light shooting and different displays may cause the color of the objects in the picture to be slightly different from the real objects. The
allowable measurement error is+- 1-3cm.










6-380V Yellow 8 in 1
Features:
Small and light, easy to carry and use
8 in 1 design, with LED light, screwdriver and other functions
With voltage and polarity indication, suitable for DC and AC voltage
Specifications:
Material: Plastic + metal
Size: 148 * 17 * 26 mm
Voltage range: 6-380V
Frequency range: 50-500Hz
Package includes:
1* Voltage tester
Note:
Please allow for slight size differences due to different manual measurements.
Due to differences in lighting and screen Settings, the color of the project may be slightly different from the image.









6-24V copper
Features:
1. Test range: DC 6V-12V-24V.
2. Innovative flexible wire has good tensile strength.
3. Unique long life tube, no heat, comfortable and safe.
4. Small size, compact structure, equipped with clips, easy to carry and use.
Specifications:
Material: Copper
Tester length: about 11cm
Cable length: about 62cm
Shipping list:
1* automobile maintenance special circuit measuring pen
Note:
1. Transition: 1cm=10mm=0.39 inches
2. Due to manual measurement, please allow an error of 0-1cm. Please make sure you don't mind before you bid.
3. Due to differences between different monitors, the picture may not reflect the actual color of the project. Thank you very much.










3-48V Black
Description:
The probe pen is ideal for examining circuits, fuses, switches, and wiring on cars, trailers, boats, motorcycles, and other low-voltage systems. Ground the alligator clamp and connect the probe to the test circuit. If the indicator light is on, there is electricity.
Features:
1. Test a range of circuits from 3V to 48V.
2. Lightweight design, super easy to carry.
3. When the circuit is connected, the light on the handle will glow.
4. The handle is made of plastic and the tempered carbon steel probe is chrome plated.
5. The sharp steel probe can easily Pierce the insulation layer of the wire to check the circuit.
Specifications:
Material: Plastic, carbon steel
Color: Black
Clamp capacity: 20A
New bulb: (replaceable) dual lamp
Voltage range: 3V-48V
Pen length: 17.3cm/6.8 inches
Probe length: Approx. 8.3cm/3.3 inches
Line length: approx. 96cm/37.8 inches
Package includes:
1* circuit tester
Attention:
1. Due to manual measurement, please allow 1-3mm error. Make sure you don't mind before you bid.
2. Due to differences between different monitors, the picture may not reflect the actual color of the project. Thank you very much.









Shipping and returns
Shipping and taxes are calculated at checkout. Review the store policies for delivery and return details.

PICK UP WHERE YOU LEFT OFF